MICROMAX Q397 SPD SP7731GEA 6.0 DEAD BOOT REPEAR OK 100% TESTED FIRMWARE BY MIM TELECOM
SP7731GEA_HDR_Q397_6.0_Micromax_Q397_BD_SW_V005_HW_V6.0_20160920_Micromax_Q397
Model Name : Q397
Model Brand : Micromax
Model Device: Q397
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : Micromax_Q397_BD_SW_V005_HW_V6.0_20160920
Model Ext : Micromax Q397
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1985 MiB
Saved to : C:\Users\gsmmalek\Desktop\SP7731GEA_HDR_Q397_6.0_Micromax_Q397_BD_SW_V005_HW_V6.0_20160920_Micromax_Q397\
Done!
Elapsed: 00:13:07
Reconnect Power/Cable!
Model Brand : Micromax
Model Device: Q397
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : Micromax_Q397_BD_SW_V005_HW_V6.0_20160920
Model Ext : Micromax Q397
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1985 MiB
Saved to : C:\Users\gsmmalek\Desktop\SP7731GEA_HDR_Q397_6.0_Micromax_Q397_BD_SW_V005_HW_V6.0_20160920_Micromax_Q397\
Done!
Elapsed: 00:13:07
Reconnect Power/Cable!
Comments
Post a Comment